Modeling and control of a new unmanned aerial vehicle (SUAVİ) with tilt-wing mechanism

Unmanned Aerial Vehicles (UAV) are flying robots that are either controlled by an operator from a remote location or flown autonomously according to the given commands. UAVs are often equipped with cameras, other sensors and communication units and used for missions which are dangerous, tedious or effortful for manned aircrafts. Some applications of these vehicles are surveillance, reconnaissance, traffic monitoring, exploration of disasters (fire, earthquake, flood, etc...) and agricultural pesticide spraying. This thesis work focuses on the modeling and control of a new quadrotor Unmanned Aerial Vehicle (SUAVI: Sabanci University Unmanned Aerial Vehicle) with tilt-wing mechanism. The vehicle is capable of vertical take-off and landing (VTOL) like a helicopter and flying horizontally like an airplane. The design specifications and sensor/actuator integration of SUAVI are presented. A full mathematical model that incorporates the dynamics of horizontal flight, vertical flight and the transition mode is obtained using Newton-Euler formulation. Attitude and position controllers (PID, LQR) are designed in linear framework for the VTOL mode of the vehicle. A controller for transition between vertical and horizontal flight modes is also proposed. All controllers are evaluated in simulations along with 3D visualization. For real-time experiments, Kalman filtering is employed to obtain accurate roll and pitch angle estimations. VTOL experiments with the prototype demonstrate the success of the proposed controllers

Robust position control of a tilt-wing quadrotor

This paper presents a robust position controller for a tilt-wing quadrotor to track desired trajectories under external wind and aerodynamic disturbances. Wind effects are modeled using Dryden model and are included in the dynamic model of the vehicle. Robust position control is achieved by introducing a disturbance observer which estimates the total disturbance acting on the system. In the design of the disturbance observer, the nonlinear terms which appear in the dynamics of the aerial vehicle are also treated as disturbances and included in the total disturbance. Utilization of the disturbance observer implies a linear model with nominal parameters. Since the resulting dynamics are linear, only PID type simple controllers are designed for position and attitude control. Simulations and experimental results show that the performance of the observer based position control system is quite satisfactory

Robust hovering control of a quad tilt-wing UAV

This paper presents design of a robust hovering controller for a quad tilt-wing UAV to hover at a desired position under external wind and aerodynamic disturbances. Wind and the aerodynamic disturbances are modeled using the Dryden model. In order to increase the robustness of the system, a disturbance observer is utilized to estimate the unknown disturbances acting on the system. Nonlinear terms which appear in the dynamics of the vehicle are also treated as disturbances and included in the total disturbance. Proper compensation of disturbances implies a linear model with nominal parameters. Thus, for robust hovering control, only PID type simple controllers have been employed and their performances have been found very satisfactory. Proposed hovering controller has been verified with several simulations and experiments

LQR and SMC stabilization of a new unmanned aerial vehicle

We present our ongoing work on the development of a new quadrotor aerial vehicle which has a tilt-wing mechanism. The vehicle is capable of take-off/landing in vertical flight mode (VTOL) and flying over long distances in horizontal flight mode. Full dynamic model of the vehicle is derived using Newton-Euler formulation. Linear and nonlinear controllers for the stabilization of attitude of the vehicle and control of its altitude have been designed and implemented via simulations. In particular, an LQR controller has been shown to be quite effective in the vertical flight mode for all possible yaw angles. A sliding mode controller (SMC) with recursive nature has also been proposed to stabilize the vehicle’s attitude and altitude. Simulation results show that proposed controllers provide satisfactory performance in achieving desired maneuvers

Dynamic model and control of a new quadrotor unmanned aerial vehicle with tilt-wing mechanism

In this work a dynamic model of a new quadrotor aerial vehicle that is equipped with a tilt-wing mechanism is presented. The vehicle has the capabilities of vertical take-off/landing (VTOL) like a helicopter and flying horizontal like an airplane. Dynamic model of the vehicle is derived both for vertical and horizontal flight modes using Newton-Euler formulation. An LQR controller for the vertical flight mode has also been developed and its performance has been tested with several simulations

Modeling and position control of a new quad-rotor unmanned aerial vehicle with tilt-wing mechanism

In this work a dynamic model of a new quadrotor aerial vehicle that is equipped with a tilt-wing mechanism is presented. The vehicle has the capabilities of vertical take-off/landing (VTOL) like a helicopter and flying horizontal like an airplane. Dynamic model of the vehicle is derived both for vertical and horizontal flight modes using Newton-Euler formulation. An LQR controller for the vertical flight mode has also been developed and its performance has been tested with several simulations

Mathematical modeling and vertical flight control of a tilt-wing UAV

This paper presents a mathematical model and vertical flight control algorithms for a new tilt-wing unmanned aerial vehicle (UAV). The vehicle is capable of vertical take-off and landing (VTOL). Due to its tilt-wing structure, it can also fly horizontally. The mathematical model of the vehicle is obtained using Newton-Euler formulation. A gravity compensated PID controller is designed for altitude control, and three PID controllers are designed for attitude stabilization of the vehicle. Performances of these controllers are found to be quite satisfactory as demonstrated by indoor and outdoor flight experiments

Yeni bir insansız hava aracının (SUAVİ) prototip üretimi ve algılayıcı-eyleyici entegrasyonu

Bu çalısmada, dört-döner rotoru ile helikopter gibi dikine kalkıs ve inis yapabilen aynı zamanda da uçak gibi uzun menzil yatay uçus yeteneğine sahip yeni bir insansız otonom hava aracının mekanik ve aerodinamik tasarımı, karbon kompozit imalatı, algılayıcı eyleyici sistem entegrasyonu ve uçus deneyleri anlatılmıstır. Gelistirilen sistem ve içinde kullanılan algılayıcı eyleyici entegrasyonunun basarımı benzetim ve deneylerle doğrulanmıstır